Check out our fresh newly accredited programmes — 70% AT First Semester Only!

Additional menu

Bowen University

Home

Christian OSUEKE

Professor
college of Agriculture, Engineering and Science (COAES)
Mechatronics Programme

Christian Okechukwu OSUEKE is a Professor of Design, Automation, and Energy and a doctorate degree (Ph.D.) holder in Mechanical Engineering, a registered engineer with Council for Regulation of Engineering in Nigeria (COREN), a member of Nigerian Society of Engineers (MNSE), a member of Nigerian Institute of Mechanical Engineers (MNiMechE), member International Association of Engineers (IAENG) and a passionate, result oriented leader. He has over 28 years of experience as a Mechanical and Mechatronics Engineer, 25 years of experience as a Lecturer and many years of experience as an Administrator. He was the pioneer Dean, College of Engineering, Landmark University, he previously occupied the offices of the Dean of Student Affairs, Head, Mechanical Engineering Department and Chairman of the University Project Consortium in the same University for a period of 2, 5 and 4 years respectively. He delivered the 5th inaugural lecture of Landmark University titled ‘Divine Secrets – The Booster of Innovative Design and Automation’. Currently a faculty in the Department of Mechatronics and the former Provost, College of Agriculture, Engineering and Science, Bowen University Iwo, Osun State. Professor Osueke is also an impact – oriented researcher with 82 journal articles and 4 published textbooks making a total of 86 publications. He is also on the COREN and NUC team for accreditation and verification visitation to various universities in Nigeria. He is an exceptional leader who always takes initiative, shows enthusiasm and delivers beyond expectation for any work he is responsible for. He is a Christian with integrity as one of his core values.

Education
  • Bachelor of Engineering (B. Eng.) Degree in Mechanical Engineering (Industrial and Production Engineering), Federal University of Technology Owerri. (1994)
  • Master of Engineering (M. Eng.) Degree in Mechanical and Production Engineering, Enugu State University of Science and Technology, Enugu. (1998)
  • Doctor of Philosophy (Ph.D.) in Mechanical Engineering, Nnamdi Azikiwe University, Awka. (2011)
Research

Completed Research

  • Osueke C. O., Adeoye, A. O., Diarah S. R., Ikpe E. C., Ani O. I., Ayoola A. D., Automated Voice Controlled Irrigation, Fertigation and Hydroponics Simulation System.
  • Osueke C. O., Adeoye, A. O., Ani. O. I, Egwuagu, O. M., Development of a Tractor Driven PotatoHarvester.

Ongoing Research

  1. Lumpy Disease Detection using Computer Vision for Automated Dairy Management System.
  2. Design and Development of Automated Diary Milking Machine.
  3. Prospects, Gains and Future Advancement in Automatic Milking Machine in Nigeria
Institutional Service
  • Provost, College of Agriculture, Engineering and Science. (2021-2023)
  • Senate member, Bowen University, Iwo. (2021-Till Date)
  • Member, Committee of Provosts and Directors. (2021-Till Date)
  • Member, Mechatronics Departmental Board. (2021-Till Date)
  • Member, CCMAS Mechatronics development Committee. (2022-2023)
  • Member, University Examination Irregularities Committee. (2021-2021)
Professional Service
  • Membership of Professional Bodies
  • Corporate member, Nigeria Society of Engineers (MNSE, 12399)
  • COREN (R 15, 047)
  • Member, Nigerian Institute of Mechanical Engineers (MNiMechE, O00363)
  • Member, International Association of Engineers (MIAENG, 269352)
Selected Publications

Book Publications

  1. Osueke, C.O.; Emodi, S.A.AN. (2004). Engineering Design: Design + Print APLIC LTD Enugu, (ISBN: 978-10253- 0-9), PP 1 – 107.
  2. Osueke, C.O.; Ujam, A.J.; Ozioko, E.R.; Egwuagu O.M. (2008). Engineering Drawing: Providence Press Nig. Ltd, Enugu, (ISBN: 978-978 – 49538-8-7), PP 1-129.
  3. Osueke, C.O.; Ofondu, I.O.; Ozioko, E.R. (2012). System Analysis in Engineering: Prince Digital Press, Enugu, (ISBN: 978 052 765 20), PP 1-362.
  4. Osueke, C.O. (2018). Divine Secrets: The Booster of Innovative design and Automation. Ennyic press Ltd, Lagos, (978-978-965-320-1), PP 1-106.

Journal Articles

  1. Osueke, C.O. (2010). Design and Development of a Cereal Thresher. African journal of Engineering Research and Development, 3(4), 6-10.
  2. Osueke, C.O. (2010). Design and Construction of a Yam pounding Machine. African Journal of Engineering Research and Development, 3(4), 11-16.
  3. Osueke, C.O. (2010). Design and Construction of a Rice Destoner. Journal of Engineering Science and Technology, 5(3), 39-44.
  4. Osueke, C.O. (2011). Simulation and Optimization Modeling of Performance of a Cereal Thresher.International Journal of Engineering and Technology (IJET-IJENS), 11(3), 143- 152.
  5. Osueke, C.O., Ofondu, I.O. (2011). Design for Uncertainties in Deep Drawing Processes using the Probabilistic Approach with an Optimum Blank Holder Force (B.H.F) Profile. International Journal of Advanced Engineering Science and Technologies (IJAEST), 8(2), 145-151.
  6. Osueke, C.O., Ofondu, I.O. (2011). Fuel Adulteration in Nigeria and its Consequences. International Journal of Engineering and Technology (IJET-IJENS), 11(4), 34-37.
  7. Osueke, C.O., Uzendu, P., Nwabueze, I.O. (2011). Study of Stress-Strain and Anisotropic Behaviour ofSheet Metal for Deep Drawing Processes. International Journal of Advanced Engineering Science and Technologies (IJAEST), 9(2), 280-288.
  1. Osueke, C.O. & Ofondu, I.O. (2011). Study of the Adverse Effect of Aircraft Noise in Nigeria & Discovered Solutions. International Journal of Scientific & Engineering Research (IJSER), 2(9), 1-4.
  2. Osueke, C.O., Onyekachi, E.M., Nwabueze, I.O. (2011). Combating Problems with Solar Power: A Cost-Effective Improvement on the Conversion Efficiency of Solar Panels. International Journal of Scientific & Engineering Research (IJSER), 2(10), 1-9.
  3. Osueke, C.O., Onyekachi, E.M. (2011). Car Incorporated Designs for Crash Worthiness. International Journal of Advanced Engineering Science and Technologies (IJAEST), 10(2), 234-238.
  1. Osueke, C.O., Ezeh, C.T. (2011). Assessment of Nigeria Power Sub-sector and Electricity Generation Projections. International Journal of Scientific & Engineering Research (IJSER), 2(11), 1-7.
  2. Osueke, C.O. (2011). Application of Frictional Modeling in Simulation and Optimization Modeling of aCereal Thresher. International Journal of Scientific & Engineering Research (IJSER), 2(11), 1-14.
  3. Osueke, C.O., Obiora, E.M. (2011). Design of a Solar Power System for Optimum Output. International Journal of Advanced Engineering Science and Technologies (IJAEST), 11(1), 232-237.
  4. Osueke, C.O., Ezugwu, C.A.K. (2011). Study of Nigeria Energy Resources and its Consumption. International Journal of Scientific & Engineering Research (IJSER), 2(12), 1-8.
  5. Osueke, C.O. (2011). Frictional Modeling of a Cereal Thresher, American Journal of Engineering andApplied Sciences. American Journal of Engineering and Applied Sciences 4(3), 405- 412.
  6. Osueke, C.O., Uguru-Okorie, D.C. (2012). The Role of Tyre in Car Crash, Its Cause, and Prevention. International Journal of Emerging Technology and Advance Engineering, 2(12), 54 – 57.
  7. Gana, A.J., Osueke O. C. (2012). Integrated Water Resources and Waste Management. World Journal of Applied Science and Technology, 4(2), 301 – 309.
  1. Osueke, C.O., Uguru-Okorie, D.C., Abanihi, V.K. (2013). Electricity Stability in Nigeria throughIncreased Hydropower Generation. Journal of Emerging Technology and Advance Engineering, 3(1), 9 –13.
  2. Osueke, C.O., Uzendu, P., Ogbonna, I.D. (2013). Study and Evaluation of Solar Energy Variation. International Journal of Emerging of Technology and Advance Engineering, 3(6), 501 – 505.
  3. Gana, A.J., Osueke C.O. (2013). Women in Science and Technology: Female Student’s Attitude towards Science and Engineering Courses (A Case Study of Female Student Enrolment in Nigeria Higher Institutions. International Journal of Advancement in Development Studies, 8(2), 1 – 5.
  4. Osueke, C.O. (2013). Study of the Influence of Crop, Machine and Operating Parameters on Performance of Cereal Threshers. International Journal of Engineering Research and Development, 7(9), 01 – 09.
  5. Osueke, C.O. (2013). Modelling of a Fluidized Bed for Grain Drying. International Journal of Engineering Research and Development, 7(9), 10 – 15.
  6. Diarah, R.S., Osueke, C.O. & Egbune, D. (2014). Micro Controller Based Code Locking System with Alarm. Journal of Electrical and Electronics Engineering, 9(1), 09 – 17.
  7. Osueke, C.O., Ikpotokin I. (2014). Experimental and Numerical Investigation of Forced Convection inTube-Type Heat Exchanger. International Journal of Engineering Research and Development, 10(6), 22-31.
  1. Ikpotokin, I., Osueke, C.O. (2014). Heat Transfer and Fluid Flow Characteristics Study for In-Line Tube Bank in Cross-Flow. International Journal of Engineering & Sciences, 14(3), 93-105.
  2. Akinnuli, B.O., Bekunmi, O.S., Osueke, C.O. (2015). Design Concepts towards Cocoa Winnowing Mechanization for Nibs Production in Manufacturing Industries. British Journal of Applied Science & Technology, 8(1), 35-45
  3. Osueke, C. O., Ezugwu, C. A. K. & Adeoye, A. O. (2015). Dynamic Approach to Optimization of Material Removal Rate through Programmed Optimal Choice of Milling Process Parameter, Part 1: Validation of Results with CNC. International Journal of Innovative Research in Advanced Engineering, 2(5), 118-129.
  4. Okonkwo, U. C., Osueke C. O. & Ezugwu C. A. K. (2015). Minimizing Machining Time in Pocket Milling Based on Optimal Combination of the Three Basic Prescription Parameters. International Research Journal of Innovative Engineering, 11(4), 12-54.
  5. Osueke, C. O., Akinnuli, B.O., Adediran, A. A., Ikubanni, P. P. & Agboola, O.A. (2015). An Algorithm of a Convectional Factory Electric Tray Dryer. International Journal of Engineering and Science, 4(6),17-25.
  6. Osueke, C.O., Onokwai, A.O. & Adeoye, A.O. (2015). Behaviours of Stresses on Materials at Different Angle of Inclination using Stress and Mohr’s Circle Computation and transformation Software, International Journal of Innovative Research in Advanced Engineering, 2(6), 24-35.
  7. Osueke, C. O., Onokwai, A. O. & Adeoye, A. O. (2015). Experimental Investigation on the Effect of Fluid Flow Rate on the Performance of a Parallel Flow Heat Exchange, International Journal of Innovative Research in Advanced Engineering, 2(6), 10-23.
  8. Akinuli, B.O., Osueke, C.O., Ikubanni, P.P., Agboola, O. O. & Adediran, A.A. (2015). Design concepts Towards Electric Powered Gari Frying machine. International Journal OF Scientific & Engineering Research, 6(5), 1043-1050
  9. Osueke, C. O., Uguru-Okorie, D. C. & Kuhe, A. (2015). Sample Size Effect on Combustion Analysis. International Journal of Scientific Engineering and Technology, 4(7), 401-406.
  10. Osueke, C.O., Onokwai, A.O. & Adeoye, A.O. (2015). Energy and Exergy Analysis of 75MW Steam Power Plant in Sapele (Nigeria). International Journal of Innovative Research in Advanced Engineering, 2(6), 169-179.
  11. Osueke, C.O., Akinnuli, B.O. & Ojo O.O. (2015). Modelling Equipment Procurement Strategic Decisions Competing for Limited Available Budget under Redundant Accessory Cost. Engineering Management Research, 4(2), 80-86.
  12. Adeoye, A. O., Osueke, C. O. & Onokwai, A. O. (2015). Enhancing the Performance of 75mw Steam Power Plant with Second Law Efficiency, Condenser Pressure and Rankine Cycle. The International Journal of Engineering and Science (IJES), 4(9), 18-29.
  13. Osueke, C.O., Onokwai, A.O., Adeoye, A.O. & Ezugwu, C.A.K. (2016). Behaviours of Stresses onMaterials at Different Angle of Inclination Using Stress and Mohr’s Circle Computation and Transformation Software. International Journal of Innovative Research in Advanced Engineering (IJIRAE), 8 (6), 2349-2163.
  1. Ikubanni, P.P., Komolafe, C.A., Agboola, O.O. & Osueke, C.O. (2017). Moringa Seed DehullingMachine: A New Conceptual Design. Journal of Production Engineering (JPE), 20 (2), 73-78.
  2. Ikubanni, P.P., Agboola, O.O., Adediran, A.A., Adeleke, A.A., Ogunsemi, B.T., Olabamiji, T.S., Uguru-Okorie, D.C. & Osueke, C.O. (2018). Experimental data on mechanical properties evaluation of medium carbon steel quenched in different waste media. Data in Brief. 20, 1224 – 1228.
  3. Osueke, C.O., Olayanju, T.M.A., Onokwai, A.O., Uzendu, P. (2018). Design and Construction of an Automatic Fish Feeder Machine. International Journal of Mechanical Engineering and Technology (IJMET). 9 (10), 1631-1645.
  4. Olayinka, O.A., Ikubanni, P.P., Ogunsemi, B.T., Ibikunle, R.A., Adediran, A.A., Kareem, B. A., Akinnuli, O.B., Osueke, C.O. (2018). Dataset for the Development of a Diagnostic Schedule for a Defective LC-195V5 CNC Milling Machine at FUTA Central Workshop. Data in Brief.
  1. Olayanju, T. M. A., Osueke C. O., Dahunsi S. O., Okonkwo, C. O., Adekunle, N. O., Olarenwaju, O. O., Oludare A. (2018). Mechanical Behaviour of Moringa Oleifera Seeds under Compression Loading. International Journal of Mechanical Engineering and Technology. (IJMET). 9(10), pp.
  2. Ezugwu, C. A, Osueke, C. O., Onokwai, A. O., Olayanju, T. M. A., Uguru-Okorie, D. C., Ikpotokin, I., Ibikunle, R. (2018). Modeling of Regenerative Chatter of Milling Process to Delineate Stable Cutting Region from Unstable Region. International Journal of Mechanical Engineering and Technology. (IJMET). 9 (11), pp.
  3. Osueke, C. O., Onokwai, A. O., Ezugwu, C. A, Uzendu, P., Okunola, A. A., Ikpotokin, I., Ibiwoye, M.(2018). Design and Fabrication of Anaerobic Digester for Biogas Production, International Journal of Civil Engineering and Technology. (IJCIET). 9 (11), 2639-3648.
  4. Uguru-Okorie., D. C., Ikpotokin, I., Osueke C. O., Ezugwu, C. A., Fadare, A. D. (2018). Experimental Comparison of Staggered and In-line Tube-bank Thermal Performance. International Journal ofMechanical Engineering and Technology. (IJMET). 9 (13), 1061- 1070.
  5. Osueke, C. O., Olayanju, T.M.A., Ezugwu, C.A., Onokwai, A. O., Ikpotokin, I. (2018). Comparative Calorific Evaluation of Biomass Fuel and Fossil Fuel. International Journal of Mechanical Engineering and Technology. (IJMET). 9 (13), 1576-1590.
  6. Okunola, A. A., Adewunmi, A. D., Okonkwo, C. E., Kim, P. D., Okoro, I., Ogunrinu, S. I., Osueke, C.O., Idahosa, E. O. (2018). Physico-Chemical Properties of Various Biomass used in Anaerobic Digestion. (2018). International Journal of Civil Engineering and Technology. (IJCIET). 9 (13), 1403-1410.
  7. Owolabi, S. E., Aregbesola, A., Adeniyi, O., Osueke, C. O., Idiegbeyan-Ose, J., Eyiolorunshe, T.,Obasaju, B. O. (2018). Comparative Analysis of Citation Patterns in Civil and Mechanical Engineering Research Projects. International Journal of Civil Engineering and Technology. (IJCIET). 9 (13), 1424-1430.
  1. Okunola, A. A., Isaac-Bamgboye, A., Olayanju, T. M. A., Osueke, C. O., Alahassan, E. (2018). Development of a Rice Cleaner Cum Grader for Cottage Industry Processors in Nigeria. International Journal of Mechanical Engineering and Technology. (IJMET). 9 (11), 2339-2351.
  2. Osueke, C. O., Idiegbeyan-Ose, J., Eyiolorunshe, T., Aregbesola, A., Owolabi, S. E. (2018). Analysis ofMechanical Engineering Research Activities a Case Study using Biblio Metric Method: A Case Study of Undergraduate Projects. International Journal of Mechanical Engineering and Technology. (IJMET). 9 (11), 1014-1021.
  3. Soyinka O. K, Hakeem A., Osueke C. O (2018). Optimal Helical Spring Design for a P- POD using Backtrack Search Algorithm 2018. International Journal of Scientific and Engineering Research. 9(8)
  4. Agboola, O. O., Ikubanni, P.P., Ogunsemi, B. T., Ibikunle, R. A., Adediran, A. A., Kareem, B., Akinnuli, B. O., Osueke, C.O. (2019). Dataset for the Development of a Diagnostic Schedule for a Defective LC-195V5 CNC Milling Machine at FUTA Central Workshop. Data in Brief. 21, 1496-1503.
  5. Onokwai, A. O. Okonkwo, U.C. Osueke, C. O., Ezugwu, C. A., Eze, N. C., Diarah, R. S., Olawale, O.(2019). Quantifying Cassava Waste Generation and Biogas Production in Eha- Alumona Grinding Mills. International Journal of Civil Engineering and Technology. (IJCIET). 10 (1), 2032-2043.
  6. Olawale, O., Adekunle, A., Osueke, C. O., Olayanju, T. M. A., Akinyemi, B. A. (2019). Construction of Inverted Powered Lawn Mower. International Journal of Civil Engineering and Technology (IJCIET), 10(2), 222-230.
  7. Ikpotokin, I., Uguru-Okorie, D. C., Osueke, C. O., Dare, A. A., Petinrin, M. O. (2019). Numerical Investigation of Shell and Tube Heat Exchanger with Parabolic Segmental Baffle Cut. International Journal of Mechanical Engineering and Technology. (IJMET). 10 (1), 1221-1234.
  8. Ezugwu, C. A., Osueke, C. O., Onokwai, A. O., Diarah, R. S., Olayanju, T. M. A., Braimoh, S. O., Olawale, O., Nnaji, F. C. (2019). Design and Fabrication of a Motorized/Power Operated Plantain Slicer for Optimum Chips Production. International Journal of Mechanical Engineering and Technology. (IJMET). 10 (1), 1485-1495.
  9. Okonkwo, U. C., Onokwai, A. O., Okeke, C. L., Osueke, C. O., Ezugwu, C. A. Diarah, R. S., Aremu, C. O. (2019). Investigation of the Effect of Temperature on the Rate of Drying Moisture and Cyanide Contents of Cassava Chips using Oven Drying Process. International Journal of Mechanical Engineeringand Technology. (IJMET). 10 (1), 1501- 1520.
  10. Atoyebi, D. O., Osueke, C. O., Badiru, S., Gana, A. J., Ikpotokin, I., Modupe, A. E., Tegene, G. A.(2019). Evaluation of Particle Board from Sugarcane Bagasse and Corn Cob. International Journal of Mechanical Engineering and Technology. (IJMET). 10 (1), 1193- 1200.
  1. Diarah, R.S., Oyetunji, S. A., Osueke, C. O., Onokwai, A. O. (2019). Dataset on Cellular and Geo-Spatial Information of a 10km Distance along Akure-Ilesha Road. Data in Brief, 22, 530-536.
  2. Uguru-Okorie, D., Osueke, C. O., Olayanju, A., Oyekunle, D. O. (2019). Promoting Eco- Friendly Corrosion Inhibition using Bitter Kola Leaves in Carbon Mild Steel using HCl Acidic Media. International Journal of Mechanical Engineering and Technology. (IJMET). 10 (2), 222-230.
  3. Kolawole, A., A., Agboola, O.O., Ibikunle, P.P., Raji, O. G., Osueke, C. O. (2019). Reliability and Power Loss Analysis: A Case Study of a Power Plant in Nigeria. Cogent Engineering, 6(1).
  4. Onokwai, A. O., Okonkwo, U. C., Osueke, C. O., Okafor, C. E., Dahunsi, S. O., Olayanju, T. M. A., Ojediran, J. O., Izebere, J. O. (2019). Design, Modelling, Energy and Exergy Analysis of a Parabolic Cooker. Renewable Energy, 142, 497-510.
  1. Dahunsi, S. O., Adesulu-Dahunsi, A. T., Osueke, C. O., Olayanju, T. M. A., Ojediran, J. O., Izebere, J. O. (2019). Biogas Generation from Sorghum Bicolor Stalk: Effect of Pretreatment Methods and Economic Feasibility. Energy Report, 5(2019), 584-593.
  2. Dahunsi, S. O., Osueke, C.O., Olayanju, T.M.A., Lawal, A. I. (2019). Co-digestion of Theobroma Cacao (Cocoa) Pod Husk and Poultry Manure for Energy Generation: Effect of Pretreatment Methods. Bioresources Technology, 283, 229-241.
  3. R.A Ibikunle, I. F Titiladayo. B.O Akinnuli, C. O Osueke, S. O Dahunsi (2019). Impact of Physical and Chemical Properties of Municipal Solid Waste on its Electrical Power Rating Potential. Journal of Physics: Conference Series 1299 (1), 012003
  4. Komolafe, C. A., Oluwaleye, I. O., Awogbemi, O., Osueke, C. O. (2019). Experimental Investigation andThermal Analysis of Solar Heater having Rectangular Rib Roughness on the Absorber Plate. Case Studies in Thermal Engineering, 14(2019), 100442.
  5. Diarah, R. S., Oyetunji, S. A., Osueke, C. O., Onokwai, A. O., Ezugwu, C. A. (2019). Vehicular Speed Determination using Cellular and Geo-Spatial Information. International Journal of Mechanical Engineering and Technology. (IJMET). 10 (1), 1496-1506.
  6. R. A Ibikunle, I. F Titiladayo, D. C Uguru-Okorie, C. O Osueke, A Olayanju (2019). Predicting the Quantity of Municipal Solid Waste Required for Power Generation Using Power Plant Design Parameters. Journal of Physics: Conference Series 1378 (3), 032090.
  7. D. C Uguru-Okorie, I Ikpotokin, C. O Osueke, O Olawale (2019). Wind Energy Systems for Omu-Aran, Kwara State, Nigeria. Journal of Physics: Conference Series 1378 (3), 032008.
  8. A. O Onokwai, U. C Okonkwo, C. O Osueke, T. M. A Olayanju, C. A Ezugwu (2019). Thermal Analysis of Solar Box Cooker in Omu-Aran Metropolis. Journal of Physics: Conference Series 1378 (3), 032065.
  1. Balogun K., Lasode M., Onokwai A.O., Ezugwu CA., Olayanju T.M.A., Osueke C.O. (2019). Elemental Analysis and Combustion Characteristics Evaluation of Nigerian Biomass Resources. International Journal of Mechanical Engineering and Technology (IJMET) 10(2). 1522-1527.
  2. Okunola A.A., Gana A.J., Olorunfemi K.O., Obaniyi K.S., Osueke C.O., Olasehinde D.A. (2020). ClimateChange and Potential Environmental Hazards with Perspective Adaptation Technologies in Nigeria, A review. E&ES 445(1) 012059.
  3. M. O Iyanda, E. A Alhassan, C. O Osueke, C Okonkwo (2020). Development of a Moringa Oleifera Seed Shelling Machine. International Journal of Engineering Research in Africa 46, 53-62
  4. Adepoju T.F., Ibeh M.A., Babatunde E.O., Abegunde G.S., Adepoju P.O., Asuquo A.J., Osueke C.O. (2020). Datasets on Process Transesterification of Binary Blend of Oil for Fatty Acid Ethyl Ester (FAEE) Synthesized Via the Ethanolysis of Heterogeneous Doped Catalyst. Data in Brief 31(8) 105905
  5. Oladejo S. O., Dahunsi S.O. Adesulu-Dahunsi A.T., Ojo S.O., Lawal I.A. Eunice O.I. Olanipekuna A.A., Ibikunle R.A., Osueke C.O., Ajayi O.E., Osueke N., Evbuomwan I (2020). Energy Generation from Anaerobic Co-Digestion of Food Waste, Cow Dung and Piggery Dung. Bioresource Technology 313(10) 123694.
  6. Nnodim C. T., Arowolo, O. M., Ajani A. A., Okhuegbe S. N., Agboola B. D. Osueke C. O. (2021). Emerging Advances in the Internet of Things (IoT) Technology for Fast Response to Covid-19 Outbreak with ANOVA-K-NN Implementation. Engineering Letters 29(3).
  1. Onawumi A.S., Aremu A., Ajiboso O. A., Agboola O.O., Olayanju T.M.A., Osueke C.O. (2021). Development of Strategic Maintenance Prediction Model for Critical Equipment Maintenance. Materials Today: Proceedings 44 2820-2827
  2. Elemile O.O., Ibitogbe E.M., Adewumi J.R., Folorunso O.P., Osueke C.O. (2021). Health Risk Assessment of Groundwater in Omu-Aran Nigeria. Materials Science and Engineering: IOP Conference Series 1036(1) 01206
  3. R.A. Ibikunle, I.F. Titiladayo, S.O. Dahunsi, E.A. Akeju, C.O. Osueke. (2021). Characterization and Projection of Dry Season Municipal Solid Waste for Energy Production in Ilorin Metropolis, Nigeria. Waste Management and Research 39 (8), 1048- 1057.
  4. C.T. Christopher, A.M.R., Fath Elbab, C.O. Osueke, B.W. Ikua, D.N. Sila, A. Fouly. (2022). A Piezoresistive Dual-Tip Stiffness Tactile Censor for Mango Ripeness Assessment. Cogent Engineering 9 (1), 2030098.
  5. C.T. Nnodim, G.C. Kpu, S.N. Okhuegbe, A.A. Ajani, S. Adebayo, R.S. Diarah. C.O. Osueke (2022). Figures of Merit for Wind and Solar PV Integration in Electricity Grids. Journal of Scientific and IndustrialResearch (JSIR) 81 (04) 349-357.
  6. Imhade P. Okokpujie, Anthony O. Onokwai, Ejiroghene Onokpite, Kunle Babaremu, Emmanuel S.A. Ajisegiri, Christian O. Osueke, Stephen A. Akinlabi, Esther T. Akinlabi. (2023). Modelling and Optimisation of Intermediate Pyrolysis Synthesis of Bio-oil Production from Palm kernel shell. Cleaner Engineering and Technology 16, 100672.

Conferences Attended and Titles of Papers Presented with Date

  1. Okafor E.C. & Osueke C.O. (2006) Effect of Drying Surfaces and Loading Densities on The Drying Rates of Fresh Okro Pods, Paper Presented at the Fourth Annual Conference of the Agricultural Society of Nigeria at the National Root Crops Research Institute, Umudike (October 16 – 20, 2006).
  2. Osueke, C.O. (2009) Design and Construction of Solar Crop Dryer. Paper Presented at the 22ndAnnual/international Conference of the Nigeria Institute of Mechanical Engineers at Oshogbo, Osun State, (21st – 23rd October, 2009).
  3. Osueke, C.O. (2009) Improving Rice Brand Shell-life through Heat Treatment process. Paper presented at the 22nd Annual/International Conference of the Nigeria Institute of Mechanical Engineers at Oshogbo, Osun State, (21st -23rd October, 2009).
  4. Gana A.J and Osueke O.C. (2012) Integrated water resources and waste management (Nigeriaperspective): water sanitation, flood and stem water management. Paper presented at the 1st WorldConference on Applied Science and Technology held at University of Uyo, Akwa Ibom State. (2012)
  5. Gana, A.J and Osueke, O.C. (2013). Women in Science and Technology: Female Student’s Attitude towards Science and Engineering Courses (A Case Study of Female Student Enrolment in Nigeria Higher Institutions. Paper presented at 1st International Conference and Exhibition held in Uyo (2013)
  6. Onokwai, A. O., Okonkwo, U. C., Osueke, C. O., Ezugwu, C. A., Diarah, R. S. (2019). Thermal Analysis of Solar Box Cooker in Omu-Aran, Metropolis. 3rd International Conference on Engineering for a Sustainable World (ICESW 2019), Department of Mechanical Engineering, Covenant University, Otta.ICESW20190191.
  7. Uguru-Okorie, D., Ikpotokin, I., Osueke, C. O., Olawale, O. (2019). Wind Energy Systems for Omu-Aran,Kwara State. 3rd International Conference on Engineering for a Sustainable World (ICESW 2019),Department of Mechanical Engineering, Covenant University, Otta. ICESW20190128.
  1. Ibikunle, R. A., Titiladayo, I. F., Uguru-Okorie, D. C., Osueke, C. O. (2019). Predicting the Quantity ofMunicipal Solid Waste Required for Power Generation using some known Parameters. 3rd International Conference on Engineering for a Sustainable World (ICESW 2019), Department of Mechanical Engineering, Covenant University, Otta. ICESW20190219.
  2. Olawale, O., Ogundipe, S. J., Kolawale, O., Abayomi, S. T., Osueke, C. O. (2019). Modeling and Optimization of Lemon Leaves extract as an Eco-Friendly Corrosion Inhibitor for Mild-Steel in 1m HCl. International Conference of Science, Engineering and Technology-ICSET, London, United Kingdom.
  3. Onokwai, A.O., Onifade, M.K., Olusola, A.I., Onokpite, E., Ighravwe, D.E., Anyaegbuna, B.E., Osueke, C.O., Fayomi, S.O., Owamah, H.I. (2023). Reviewing the Utilization of a Road-Integrated Movable Speed Bump for Mechanical Energy Harvesting Analysis. International Conference on Engineering and Innovative Technology for a Sustainable World (ICET 2023), College of Engineering, Bells UniversityOta.
  4. Onokwai, A.O., Anaegbuna, A.I., Muslim, I.P., Amole, A., Owamah, H.I., Osueke, C.O. (2023). Sustainable Biomass Energy in Nigeria: Thermochemical Conversion Comprehensive Review. International Conference on Engineering and Innovative Technology for a Sustainable World (ICET 2023), College of Engineering, Bells University Ota.